refractory

The service life of the glass furnace, energy efficiency and the quality of glass is mainly up to refractory materials. The following practices can be performed...

بازدید :186
جمعه 23 مرداد 1394زمان :11:42
  • 1
  • 2
  • 3
  • 4
  • 5

The service life of the glass furnace, energy efficiency and the quality of glass is mainly up to refractory materials. The following practices can be performed in order to select the right refractory materials and ensure longer operating life of the glass furnace.

Consistent quality

The quality of the refractories needs to be consistent and assured. Refractories should be bought from reliable manufacturers. Normally, reliable manufacturers can develop the correct physical properties of the refractories such as high temperature strength and correct mineral structure. Once these desired properties are achieved, the performance of the refractories will be predictable and better.

Using larger refractory blocks

The use of larger refractory blocks reduces the number of joints while constructing a furnace. Recently, large sidewall blocks made up of fused cast AZSare used in the glass furnace to reduce the joints and the corrosion of refractories. The manufacturing of large blocks requires a high-capacity press for developing uniform property characteristics. Hence, it is necessary to consider the dimensions of the block and its properties to ensure its suitability for a particular application. Further, random samples should be analyzed to make sure that its properties can meet the requirement of the operating environment.

Mortar and ramming mix

The quality of the mortar and ramming mix used in the glass furnace should be similar to the quality and properties of the refractories. AZS ramming mix is used to join the fused cast AZS blocks, while low shrinkage high alumina mortar is used for joining the high alumina blocks.

Proper dimension

The dimensions of the refractories should be accurate and warpage-free.

Use of anti-corrosion refractory materials

The the refractories is likely to be damaged due to contact with molten glass and slags. In general, sparking and corrosion are the main causes of the wear and tear of refractories in the glass furnaces. Refractories with good resistance to sparking and corrosion are preferable for the glass melting furnace. Anti-corrosion refractory materials particularly suitable for alkali attack can be considered. The coating should be uniform.

Right refractory for different parts

Since the operating environment of different parts are different, it is necessary to select the right refractory materials. Silica bricks are preferred in the crown and the fused cast AZS blockis ideal for the sidewall and tank bottom.

Zhengzhou Sunrise is a refractory material supplier from China, offering high quality refractory materials for glass furnaces, including fused cast AZS block, fused cast alumina block, fused cast high zirconia block, mullite brick, zircon brick, alumina bubble brick, magnesia brick, sillimanite brick, corundum brick, low porosity fireclay brick, high alumina brick, all kinds of glass furnace ramming masses, etc..

0
برچسب ها Refractory,
نظرات این مطلب
نام
ایمیل (منتشر نمی‌شود) (لازم)
وبسایت
:) :( ;) :D ;)) :X :? :P :* =(( :O @};- :B /:) :S
نظر خصوصی
refractory refractory کد امنیتی

درباره ما
اطلاعات کاربری
نام کاربری :
رمز عبور :
آرشیو
خبر نامه


معرفی وبلاگ به یک دوست


ایمیل شما :

ایمیل دوست شما :



چت باکس




captcha


پیوندهای روزانه
  • آرشیو لینک ها
آمار سایت
  • کل مطالب : 6
  • کل نظرات : 0
  • افراد آنلاین : 1
  • تعداد اعضا : 2
  • بازدید امروز : 10
  • بازدید کننده امروز : 11
  • باردید دیروز : 0
  • بازدید کننده دیروز : 1
  • گوگل امروز : 0
  • گوگل دیروز : 0
  • بازدید هفته : 20
  • بازدید ماه : 17
  • بازدید سال : 97
  • بازدید کلی : 12208
کدهای اختصاصی